Name: HIKOKI NR 1890DC
Brand: HIKOKI
Rating: 4 (1 reviews)

Questions and Answers:

W
Whitney WebbJul 28, 2025
What to do if HIKOKI Nail Gun doesn’t operate when the power switch is ON?
- R
  richardweeksJul 28, 2025
  If your HIKOKI Nail Gun's power switch is on but the nailer isn't operating, there are several potential causes. Ensure the nailer is firmly pressed against the workpiece and that you are pulling the trigger completely. Confirm that less than 2 seconds pass between turning the push lever on and pulling the trigger, or vice versa. Check if the nail magazine is empty or contains too few fasteners, and reload it if necessary. Also, verify that the lock lever (trigger lock function) is in the “OFF” position. If the tool is either too cold (below -5°C) or too hot, allow it to reach an adequate temperature.
K
Kristopher DominguezAug 2, 2025
Why won't my HIKOKI NR 1890DC Nail Gun power switch turn on or why does it turn off automatically?
- D
  Danielle DennisAug 2, 2025
  If the power switch on your HIKOKI Nail Gun doesn't turn on or turns off automatically, it could be due to several reasons. First, ensure the battery is adequately charged. Also, make sure the push lever and trigger are in the OFF state. If the nail gun has been inactive for over 30 minutes, push and hold the power switch for more than 1 second to turn it back on.
L
leonardedwinAug 7, 2025
What to do if HIKOKI NR 1890DC operates, but no nail is driven?
- A
  Anthony MurphyAug 7, 2025
  If your HIKOKI Nail Gun operates but doesn't drive nails, start by cleaning the magazine by blowing it out and wiping it clean. Check for any jams and clear them. Also, ensure you are using the recommended nails.
A
Anthony LevyAug 12, 2025
How to fix weak drive or slow cycle on HIKOKI NR 1890DC Nail Gun?
- A
  Ashley JacksonAug 12, 2025
  If your HIKOKI Nail Gun has a weak drive or cycles slowly, readjust the nailing depth adjustment adjuster.