Do you have a question about the HIKOKI NT 50AE2 and is the answer not in the manual?
Read all safety warnings and instructions before operating the power tool.
Stop operation immediately if abnormalities are noticed.
Ensure air pressure is within the rated range for safe operation.
Avoid using near flammable substances due to spark risk.
Always wear eye protection (goggles) during operation.
Wear ear mufflers and head protection for high noise levels.
Handle the trigger and push lever carefully to prevent accidental firing.
Check for unauthorized persons, wear eye protection, check screws and leaks.
Maintain air pressure between 4.9 – 8.3 bar for optimal performance.
Instructions on safely loading nails into the magazine.
Details intermittent and continuous nailing modes.
How to adjust nailing depth using the adjuster.
Loading...