HIKOKI SP 18VA - Conformity; Spare Parts List

8. Conformity
We declare under our sole responsibility that the electronic grinder/polisher identified by the type and specific identification code *1
complies with all relevant provisions of Directives *2 and Standards *3:
*1) SP18VA C350647S
*2) 2006/42/EC (Maschinenrichtlinie), 2014/30/EU (EMV-Richtlinie), 2011/65/EU (ROHS-Richtlinie)
*3) EN 60745-1:2009 +A11:2010
EN 60745-2-3:2011+A2:2013+A11:2014+A12:2014+A13:2015
EN 55014-1:2006 +A1:2009+A2:2011
EN 55014-2:1997+A1:2001+A2:2008
EN 61000-3-2:2014
EN 61000-3-3:2013
01.08.2022 Steffen Widemann, owner of Wibec Germany
9. Spare parts list
1128 Hinged pipe clamp M8
1129 Dust cover rear section
1130 Mini swivel castor with back hole and elastic wheel 50 mm
1131 Track roller PU with protruding inner ring 35 mm
1132 Threaded rod M16 x 50 mm
1133 T-slot nut M6
1134 Rubber buffer 23 x 12 x 32 mm
1135 Hexagon screw M8 x 25
1136 Hexagon screw M6 x 12
1137 Hexagon screw M6 x 14
1138 Countersunk screw M8 x 20
1155 Star grip nut
1159 Locking bolt
1161 Dust cover front part
1162 Side guide left
1163 Side guide right
1166 Bull`s Eye spirit level
1168 Kurled knob M6-16
1381 Handle complete with foam rubber
1381-1 Holder for handle support
1381-2 Handle support
1381-3 Handle included foam rubber
1381-4 Foam rubber
1384 Adaptor block for Hikoki SP 18VA
1385 Support ring for Cowl
1386 Base frame
5