CBF&CB SERIES USER MANUAL
Chapter 3: LED Display Configuring and Debugging
3.1 Configuring Preparation
3.1.1 Ensure that power cables and data cables are correctly routed before powering up the screen and equipment.
3.1.2 Start the control computer, start the Windows system, and set the computer graphics card to duplicate mode
after the graphics card driver is finished. Short cut key is “Windows key” + “P” to select “Duplicate mode”.
3.1.3 Software Installation
Software Download Link：https://www.novastar-led.cn/index/downloadcenter/index.html?type=software
To Next Page
Loading...
