Need help?Do you have a question about the HIKVISION DS-D5032QE and is the answer not in the manual?
General| 3D | No |
|---|---|
| Panel type | - |
| Pixel pitch | 0.36375 x 0.36375 mm |
| Screen shape | Flat |
| Response time | 8 ms |
| Display diagonal | 31.5 \ |
| Display technology | LED |
| Maximum refresh rate | 60 Hz |
| Supported video modes | 1080p |
| Viewable size, vertical | 392.85 mm |
| Contrast ratio (typical) | 1400:1 |
| Display number of colors | 16.78 million colors |
| Viewable size, horizontal | 698.4 mm |
| Display brightness (typical) | 300 cd/m² |
| Supported graphics resolutions | 1920 x 1080 (HD 1080) |
| On/off switch | Yes |
| Exterior finish material | Plastic |
| Product color | Black |
| Market positioning | Business |
| DisplayPorts quantity | 0 |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Energy efficiency scale | A to G |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 55 W |
| RMS rated power | 10 W |
| Number of speakers | 2 |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 5 - 40 °C |
| Storage relative humidity (H-H) | 10 - 90 % |
| Operating relative humidity (H-H) | 20 - 80 % |
| Panel mounting interface | 100 x 100 mm |
| Package depth | 136 mm |
| Package width | 804 mm |
| Package height | 500 mm |
| Package weight | 6763 g |
| Cables included | AC |
| Harmonized System (HS) code | 85285210 |
Weight and Dimensions| Height (with stand) | 474 mm |
|---|---|
| Depth (without stand) | 64 mm |
| Width (without stand) | 727 mm |
| Height (without stand) | 424 mm |
| Weight (without stand) | 5090 g |
Warns against water contact, use near heat sources, and inserting objects into ventilation slots to prevent hazards.
Advises on safe handling, installation using provided parts, weight support, and child safety to prevent injury.
Highlights the risk of children ingesting batteries from remote controls and emphasizes keeping them out of reach.
Covers safe power cord connection, unplugging during thunderstorms, and isolation of network antenna connections.
Advises against displaying static images for extended periods to prevent permanent screen damage and image retention.
Describes the physical buttons located on the monitor for power control and input selection.
Explains the function of each button on the remote control for operating the monitor, including power, source, and volume.
Provides solutions for 'Plug-and-play' errors, fuzzy images, jitter, ripple, and missing colors due to connection problems.
Offers fixes for flawed colors, poor brightness/contrast, and horizontal/vertical interference by adjusting settings or seeking repair.
To Next Page