EasyManuals Logo

HIKVISION DS-D5032QE User Manual

HIKVISION DS-D5032QE
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
7
·
Never install the monitor in the enclosed space. Always leave
at least 4 inches or 10 centimeters of space around the moni-
tor for ventilation. Make sure that curtains or other objects do
not block the ventilation slot on the monitor.
Be careful! Dont break the monitor!
·
Before you connect the monitor to the power outlet, make
sure that the power voltage matches the value printed on the
back of the monitor. If the voltage is different, dont connect
the monitor to the power outlet.
·
If the monitor is not used for a long time, please cut off the
power supply.
Be careful of personal injury, fire or power line damage!
·
Do not put the monitor or any object on the power line.
·
As a disconnecting device, the power plug should be kept to
operate conveniently.
·
When the power line is disconnected, always hold the plug
instead of pulling the cable.
·
Before the thunderstorm comes, disconnect the monitor from
the power outlet and the antenna. Never touch any part of a
monitor, a power line, or an antenna in a thunderstorm.
·
The wired network antenna connected to the equipment must
be isolated from the protective grounding, otherwise it may
cause fire and other dangers!
Watch out for hearing impairment!
·
Avoid using headphones or earphones at high volume or for a
long time.
Low temperature
·
If the monitor is transported below 5° C, please open the
package of the monitor. Wait for the monitor to adapt to the
room temperature, and then connect the monitor to the power
outlet.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-D5032QE and is the answer not in the manual?

HIKVISION DS-D5032QE Specifications

General IconGeneral
3DNo
Panel type-
Pixel pitch0.36375 x 0.36375 mm
Screen shapeFlat
Response time8 ms
Display diagonal31.5 \
Display technologyLED
Maximum refresh rate60 Hz
Supported video modes1080p
Viewable size, vertical392.85 mm
Contrast ratio (typical)1400:1
Display number of colors16.78 million colors
Viewable size, horizontal698.4 mm
Display brightness (typical)300 cd/m²
Supported graphics resolutions1920 x 1080 (HD 1080)
On/off switchYes
Exterior finish materialPlastic
Product colorBlack
Market positioningBusiness
DisplayPorts quantity0
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Energy efficiency scaleA to G
Power consumption (standby)0.5 W
Power consumption (typical)55 W
RMS rated power10 W
Number of speakers2
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)5 - 40 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)20 - 80 %
Panel mounting interface100 x 100 mm
Package depth136 mm
Package width804 mm
Package height500 mm
Package weight6763 g
Cables includedAC
Harmonized System (HS) code85285210
Weight and Dimensions IconWeight and Dimensions
Height (with stand)474 mm
Depth (without stand)64 mm
Width (without stand)727 mm
Height (without stand)424 mm
Weight (without stand)5090 g

Related product manuals