EasyManua.ls Logo

HIKVISION DS-D5043FL-B - User Manual

HIKVISION DS-D5043FL-B
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
LCD Monitor
User Manual
Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-D5043FL-B and is the answer not in the manual?

Summary

Legal Information

About this Manual

Provides information about the manual's scope, copyright, and usage guidelines.

Trademarks

Lists Hikvision's trademarks and acknowledges other registered trademarks mentioned.

Disclaimer

Outlines limitations of warranty, liability, and user responsibilities for product use.

Perface

Symbol Conventions

Defines safety and informational symbols used throughout the document.

Applicable Models

Lists the specific monitor sizes for which this manual is relevant.

Chapter 1 Introduction

1.1 Overview

General description of the LCD monitor's capabilities and suitability for surveillance applications.

1.2 Key Features

Lists the primary technical specifications and advanced functionalities of the monitor.

1.3 Panel Buttons

Describes the touch-sensitive control buttons located on the monitor's front panel.

1.4 Interfaces

Details the various input and output ports available on the monitor's rear panel for connectivity.

1.5 Power Supply Connections

Instructions for safely connecting the monitor to a suitable power source.

1.6 Remote Control

Explanation of the remote control unit, its functions, and button descriptions.

Chapter 2 Terminal Operations

2.1 Switch Input Source

Guide on selecting different signal sources (HDMI, VGA, CVBS, USB) for display input.

2.2 Menu Descriptions

Explains OSD menu navigation, settings like language, OSD duration, and blending.

2.3 Configure Image Parameters

Details adjusting image settings like brightness, contrast, color, hue, backlight, VGA, overscan, and aspect ratio.

2.4 Configure Audio Settings

Instructions for adjusting audio settings including mute, volume, and balance.

2.5 Enable;Disable keypad lock

How to lock/unlock control panel buttons to prevent accidental operations.

2.6 System Maintenance

Covers device upgrades, defaults restore, temp monitoring, system info, sleep, power saving, screen saver, and energy diagram.

Chapter 3 Client Operation

3.1 Log in to Client

Steps for accessing and logging into the ScreenControl client software for remote management.

3.2 Configure Serial Port

Instructions for setting up the serial port connection for client-based monitor control.

3.3 Startup;Shutdown

How to turn the monitors on or off remotely using the client software.

3.4 Switch Input Source

Procedure for changing the display input signal via the client software.

Summary

Legal Information

About this Manual

Provides information about the manual's scope, copyright, and usage guidelines.

Trademarks

Lists Hikvision's trademarks and acknowledges other registered trademarks mentioned.

Disclaimer

Outlines limitations of warranty, liability, and user responsibilities for product use.

Perface

Symbol Conventions

Defines safety and informational symbols used throughout the document.

Applicable Models

Lists the specific monitor sizes for which this manual is relevant.

Chapter 1 Introduction

1.1 Overview

General description of the LCD monitor's capabilities and suitability for surveillance applications.

1.2 Key Features

Lists the primary technical specifications and advanced functionalities of the monitor.

1.3 Panel Buttons

Describes the touch-sensitive control buttons located on the monitor's front panel.

1.4 Interfaces

Details the various input and output ports available on the monitor's rear panel for connectivity.

1.5 Power Supply Connections

Instructions for safely connecting the monitor to a suitable power source.

1.6 Remote Control

Explanation of the remote control unit, its functions, and button descriptions.

Chapter 2 Terminal Operations

2.1 Switch Input Source

Guide on selecting different signal sources (HDMI, VGA, CVBS, USB) for display input.

2.2 Menu Descriptions

Explains OSD menu navigation, settings like language, OSD duration, and blending.

2.3 Configure Image Parameters

Details adjusting image settings like brightness, contrast, color, hue, backlight, VGA, overscan, and aspect ratio.

2.4 Configure Audio Settings

Instructions for adjusting audio settings including mute, volume, and balance.

2.5 Enable;Disable keypad lock

How to lock/unlock control panel buttons to prevent accidental operations.

2.6 System Maintenance

Covers device upgrades, defaults restore, temp monitoring, system info, sleep, power saving, screen saver, and energy diagram.

Chapter 3 Client Operation

3.1 Log in to Client

Steps for accessing and logging into the ScreenControl client software for remote management.

3.2 Configure Serial Port

Instructions for setting up the serial port connection for client-based monitor control.

3.3 Startup;Shutdown

How to turn the monitors on or off remotely using the client software.

3.4 Switch Input Source

Procedure for changing the display input signal via the client software.

Overview

This document outlines the features and operations of the Hikvision LCD Monitor, a reliable display solution designed for security and surveillance applications. The monitor offers excellent color reduction, advanced image processing, and precise display of video details, making it an ideal choice for demanding environments.

Function Description

The Hikvision LCD Monitor serves as a dedicated display for surveillance systems. It is engineered to provide clear and accurate visual output from various video sources. The device integrates a range of functionalities to enhance image quality, manage audio, and ensure system stability.

Key functions include:

  • High-Definition Display: The monitor supports HD display, delivering crisp and detailed visuals essential for surveillance monitoring.
  • Image Enhancement: It incorporates advanced image processing engines that automatically enhance color, contrast, and detail. This includes improving skin tones and edge clarity, which are crucial for identifying subjects in surveillance footage.
  • Noise Reduction: Built-in 3D noise reduction technology helps to clean up video signals, resulting in clearer images, especially in low-light conditions.
  • Gamma Correction: Programmable RGB gamma correction allows for fine-tuning of color accuracy, ensuring that images are displayed with true-to-life colors.
  • Multimedia Playback: Beyond surveillance, the monitor supports multimedia playback of various file types, including text, images, audio, and video, through its USB interface.
  • Audio Output: With a built-in speaker, the monitor can play audio directly, which is convenient for environments where audio monitoring is also required.
  • Input Source Switching: The monitor can seamlessly switch between multiple input sources, accommodating various surveillance setups.
  • System Maintenance: It includes features for software upgrades, restoring default settings, and monitoring internal temperatures to ensure optimal performance and longevity.

Usage Features

The Hikvision LCD Monitor is designed for user-friendly operation, offering both on-device controls and remote management capabilities.

On-Device Operation:

  • Panel Buttons: The monitor features touch buttons on its left side for essential operations. These include:
    • POWER: To confirm selections, start up the device, or shut it down by holding the button.
    • MENU: To access the main menu for configuration.
    • SOURCE: To enter the input source selection menu.
    • Directional Buttons (▲/▼/◄/►): To navigate menus, move the cursor, and adjust parameters.
  • Menu Navigation: The main menu provides access to various settings, including image mode, audio settings, and VGA parameters. Users can navigate through submenus and adjust parameters using the directional buttons and the POWER button for confirmation.
  • OSD Settings: The On-Screen Display (OSD) can be configured for language (Chinese or English), duration (how long the menu stays on screen when inactive), and blending (transparency).
  • Image Mode Configuration: Users can select from predefined image modes (Standard, Gentle, Dynamic) or customize settings in "User" mode. Adjustable parameters include brightness, contrast, color, sharpness, and hue. The availability of these parameters may vary depending on the input source.
  • Backlight Settings: The screen brightness can be adjusted through backlight settings.
  • VGA Parameter Adjustment: When VGA is the input source, parameters like row, column, clock, and phase can be adjusted to ensure correct picture positioning. An "Auto Adjust" option is also available.
  • Overscan Settings: This feature allows users to shield black borders for improved image quality. Individual edges (Left, Right, Top, Bottom) can be adjusted.
  • Aspect Ratio: The monitor supports various aspect ratios (16:9, 4:3, P-to-P) for zooming pictures, allowing users to choose the best display format for their content.
  • Image Freeze: Users can freeze the current image on the monitor. This feature is automatically disabled when the input source is switched.
  • Lighting Modes: Different lighting parameters can be set to adapt to various surrounding light conditions, including Normal Mode, Daylight Mode, and Night Mode.
  • Audio Settings: Users can control mute, volume, and balance settings for the built-in speaker.
  • Keypad Lock: A keypad lock feature prevents misoperation of the control panel buttons, enhancing security and preventing accidental changes.

Remote Control Operation:

  • The monitor comes with a remote control for convenient operation from a distance. The remote includes buttons for power, sound on/off, menu access, image freeze, source selection, directional navigation, confirmation (OK), play/pause, stop, previous/next, repeat, and return. Note that some keys are specifically for USB signal sources.

Client Operation (via ScreenControl Software):

  • Login: Users can log in to the ScreenControl client software after installation, setting the control mode to serial port, screen type to LCD-D50, and user name to guest.
  • Serial Port Configuration: The client controls the monitor via a serial port connection. Users need to configure the serial port settings, including selecting the serial port and setting the baud rate to 9600, then opening the connection.
  • Startup/Shutdown: The client allows users to turn monitors on or off, individually or in groups, by selecting virtual screens and using the dedicated startup/shutdown options.
  • Switch Input Source: Input sources can also be switched remotely through the client software, providing centralized control over multiple monitors.

Maintenance Features

The Hikvision LCD Monitor includes several features designed to facilitate maintenance and ensure long-term reliability.

  • System Information View: Users can access detailed system information, including the software version, total working hours, current board temperature, and device ID. This information is valuable for troubleshooting and tracking device usage.
  • Software Upgrade: The device supports software upgrades via a USB flash drive. This allows users to keep the monitor updated with the latest features and performance improvements. The upgrade process is guided through the menu.
  • Restore Defaults: All device parameters can be easily restored to their factory default settings, which is useful for resolving configuration issues or preparing the device for a new setup.
  • Temperature Monitoring: The monitor features an Overheat Alarm. If the board temperature exceeds a preset threshold, an alarm prompt will appear on the screen, alerting users to potential overheating issues and allowing for timely intervention. The alarm temperature can be adjusted.
  • Auto Sleep: When no signal input is detected for a preset interval, the monitor can automatically enter sleep mode, conserving energy and extending the lifespan of the display. The auto sleep duration can be configured or turned off.
  • Power Saving Mode: This mode reduces screen brightness and overall power consumption, contributing to energy efficiency and potentially extending the monitor's operational life.
  • Screen Saver: The screen saver feature allows users to set the screen mode (Blue, Black, or LOGO) when there is no signal input, preventing screen burn-in and maintaining a professional appearance.
  • Energy Diagram: Users can view an energy diagram that displays the current power consumption, power ratio (current power to maximum power), and the total accumulated power since the factory. This provides insights into the monitor's energy usage and helps in managing power efficiency.

These comprehensive features ensure that the Hikvision LCD Monitor is not only a high-performance display but also a manageable and durable solution for continuous surveillance operations.

HIKVISION DS-D5043FL-B Specifications

General IconGeneral
Color depth8 bit
Color gamut72 %
Pixel pitch490.05 x 490.05 mm
Screen shapeFlat
Response time8 ms
Backlight typeLED
Display surfaceMatt
Display diagonal43 \
Display technology-
Maximum refresh rate60 Hz
Viewable size, vertical531.02 mm
Contrast ratio (dynamic)100000:1
Viewable size, horizontal942.78 mm
Display brightness (typical)500 cd/m²
Supported graphics resolutions1920 x 1080 (HD 1080)
USB hub version2.0
Panel mounting interface400 x 300 mm
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Energy efficiency scaleA to G
Power consumption (standby)1 W
Power consumption (typical)118 W
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 80 %
Package depth208 mm
Package width1192 mm
Package height752 mm
Package weight23000 g
Cables includedAC, LAN (RJ-45)
Product colorBlack
Weight and Dimensions IconWeight and Dimensions
Bezel width (side)28.5 mm
Bezel width (bottom)31 mm
Depth (without stand)78.24 mm
Width (without stand)998.78 mm
Height (without stand)590.52 mm
Weight (without stand)21000 g

Related product manuals