HIKVISION DS-D5043FL-B - 1.5 Power Supply Connections; 1.6 Remote Control

Interface Descripon
HDMI IN HDMI digital signal input
DVI IN DVI digital signal input
VGA IN Analog VGA input
USB USB interface
AUDIO IN Audio input
RS232 IN RS-232 serial port input
RS232 Out RS-232 serial port output
1.5 Power Supply Connecons
Insert the 3-pin power plug (100 to 240 VAC, 2A) into well-grounded power socket.
Note
Disconnect the power of the monitor if it will not be used for a long me.
1.6 Remote Control
Refer to the following table for the remote controller descripons.
Figure 1-3 Remote Control
LCD Monitor User Manual
3