HIKVISION DS-D5043FL-B - Enable;Disable Auto Sleep; Enable;Disable Power Saving Mode; Configure Screen Saver; Check Energy Diagram

2.6.5 Enable/Disable Auto Sleep
When the monitor does not have signal input in a preset interval, it goes to sleep automacally.
Steps
1. Enter Auto Sleep page: MENU → Backlight
Sengs → Auto Sleep .
2. Press ◄ or ► to set Auto Sleep value or turn
o Auto Sleep.
3. Press MENU again to complete the
sengs and back to the main menu interface.
2.6.6 Enable/Disable Power Saving Mode
The Power Saving Mode can reduce screen brightness and power consumpon.
Steps
1. Enter Power Saving Mode page: MENU → Other Sengs → Power Saving Mode .
2. Press◄ or ►to enable/disable Power Saving Mode.
3. Press MENU again to complete the
sengs and back to the main menu interface.
2.6.7
Congure Screen Saver
The screen saver allows you to set the screen mode when the monitor has no signal input.
Steps
1. Enter No Signal Screensaver page: MENU → Other Sengs → No Signal Screensaver .
2. Press ◄ or ► to set Blue or Black or LOGO when there is no signal input.
3. Press MENU again to complete the
sengs and back to the main menu interface.
2.6.8 Check Energy Diagram
You can conrm the working condion of power saving mode and check current power, the power
rao, the sum power of the monitor.
Steps
1. Enter Energy Diagram page: MENU → Other Sengs → Energy Diagram .
2. Press ► to enable Energy Diagram.
3. Press MENU again to complete the
sengs and back to the main menu interface.
LCD Monitor User Manual
15