HIKVISION DS-D5043FL-B User Manual

3.4 Switch Input Source
You can switch the input source via the client.
Before You Start
Congure the serial port, and see Congure Serial Port for details.
Steps
1. Open the Screen Control page.
2. Hold the mouse to draw a rectangle to select one or
mulple virtual screens.
3. Right click and select Switch Signal.
4. Select the source according to your needs.
LCD Monitor User Manual
18

HIKVISION DS-D5043FL-B Specifications

General

Color depth	8 bit
Color gamut	72 %
Pixel pitch	490.05 x 490.05 mm
Screen shape	Flat
Response time	8 ms
Backlight type	LED
Display surface	Matt
Display diagonal	43 \
Display technology	-
Maximum refresh rate	60 Hz
Viewable size, vertical	531.02 mm
Contrast ratio (dynamic)	100000:1
Viewable size, horizontal	942.78 mm
Display brightness (typical)	500 cd/m²
Supported graphics resolutions	1920 x 1080 (HD 1080)
USB hub version	2.0
Panel mounting interface	400 x 300 mm
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Energy efficiency scale	A to G
Power consumption (standby)	1 W
Power consumption (typical)	118 W
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 80 %
Package depth	208 mm
Package width	1192 mm
Package height	752 mm
Package weight	23000 g
Cables included	AC, LAN (RJ-45)
Product color	Black

Weight and Dimensions

Bezel width (side)	28.5 mm
Bezel width (bottom)	31 mm
Depth (without stand)	78.24 mm
Width (without stand)	998.78 mm
Height (without stand)	590.52 mm
Weight (without stand)	21000 g