CBF&CB SERIES USER MANUAL
4.5 Other Important Tips for Moisture Protection
a) The daily running time of the LED Screen should be more than 1 hour (video can be played if there is
no need for use);
b) Avoid air conditioner blowing directly on the screen, ensure that the ambient humidity of the screen
is controlled at 70%.
c) Do not allow the LED Display beads to come into contact with water or wet rag.
d) Avoid touching the display beads directly with your hands or with items that can generate strong
static electricity. (e.g., nylon, wool sweaters, etc.)
(e) It's prohibited to use 84 disinfectant containing (Fluorine, Bromine) or highly effective disinfectant water to spray
directly on the environment where the display is used. If disinfection is required, it's recommended that 75% medical
alcohol be used and the power to the display must be turned off during disinfection. Prohibit flames, prevent static
electricity, maintain ventilation and pay attention to safety.
(f) If the display has not be used for a long time (two use time not more than 5 days), be sure to dehumidify before
use, using a gradual increase in brightness, slow warming to remove the accumulated moisture in the unused period
of the product, specific operation methods are as follows:
To Next Page
Loading...
Need help?
General