Device can be searched and displayed in the list in 15 seconds after it went online; it will be removed
from the list in 45 seconds after it went offline.
● Search online devices manually
You can also click to refresh the online device list manually. The newly
searched devices will be added to the online list.
2. Change the IP address and subnet mask to the same subnet as of your PC.
Steps:
1) Click the device to be modified in the device list and click to modify the
network parameters.
2) Edit the modifiable network parameters, e.g. IP address and port number.
3) Enter the admin password in the Manager Password field and click to save
the changes.
Figure 2-3 Modify Network Parameters
The default value of the IP address is “192.0.0.64”. The default user name is “admin”, and
password is “12345”.
For accessing the network camera from different subnets, please set the gateway for the
network camera after you log in.
To Next Page
Loading...
