Need help?Do you have a question about the HIKVISION DS-2CD2432F-I and is the answer not in the manual?
General| Image Sensor | 1/3" Progressive Scan CMOS |
|---|---|
| Max Resolution | 2048 x 1536 |
| Effective Pixels | 3 MP |
| Aperture | F2.0 |
| Shutter Speed | 1/3 s to 1/100, 000 s |
| Lens Mount | M12 |
| Day & Night | IR cut filter with auto switch |
| IR Range | Up to 30 m |
| Wide Dynamic Range | 120 dB |
| Digital Noise Reduction | 3D DNR |
| Video Bit Rate | 32 Kbps to 16 Mbps |
| Alarm Interface | 1 input, 1 output |
| Sensor Type | CMOS |
| Lens | 4mm |
| Field of View | 73.1° (4mm), 46° (6mm) |
| Min. Illumination | 0.01 Lux @ (F1.2, AGC ON), 0 Lux with IR |
| Compression | H.264 |
| Image Settings | Saturation, Brightness, Contrast adjustable by client software or web browser |
| Network Storage | NAS |
| Alarm Trigger | Motion detection, Tampering alarm |
| Protocols | TCP/IP, DHCP, DNS, DDNS, FTP, SMTP, NTP, HTTP, UPnP, RTSP |
| Security | User authentication, Watermark |
| System Compatibility | ONVIF, PSIA |
| Communication Interface | RJ45 10M/100M Ethernet |
| Audio Interface | 1 audio input, 1 audio output |
| Operating Conditions | -30 °C to 60 °C |
| Power Supply | PoE (802.3af) |
| Frame Rate | 20fps (2048 × 1536), 25fps (1920 × 1080) |
| Network Interface | RJ45 10M/100M Ethernet |
| Video Compression | H.264 |
Details on the equipment's compliance with FCC rules.
Statement regarding CE marking and European standards.
Guidance on proper disposal of electronic waste according to WEEE directive.
Warnings about environmental conditions, light, physical stress, and lens handling.
Advice on avoiding humidity, liquid contact, and electromagnetic interference.
Essential checks and preparations before installing the camera.
Steps for preparing the mounting bracket and using the drilling template.
Instructions for fixing the camera to the bracket and adjusting its surveillance angle.
Overview of connecting the camera to a LAN for configuration.
Methods for finding and assigning an IP address using SADP software.
Guide to changing IP address, port, and other network parameters via SADP.
Lists the necessary system, OS, and browser specifications for access.
Steps for logging into the camera's web interface and installing required plug-ins.
To Next Page
