Need help?Do you have a question about the HIKVISION DS-2CD2412F-I and is the answer not in the manual?
General| Model | DS-2CD2412F-I |
|---|---|
| Image Sensor | 1/3" Progressive Scan CMOS |
| Effective Pixels | 1280(H)x960(V) |
| Resolution | 1.3 MP |
| Lens Mount | M12 |
| Wide Dynamic Range | Digital WDR |
| Digital Noise Reduction | 3D DNR |
| Video Compression | H.264 / MJPEG |
| Bit Rate | 32 Kbps ~ 8 Mbps |
| Max. Image Resolution | 1280 x 960 |
| Alarm Input | 1 |
| Alarm Output | 1 |
| Weatherproof Rating | IP66 |
| Type | Network Camera |
| Day & Night | ICR |
| Frame Rate | 30fps @ 1280x960 |
| Image Settings | Saturation, Brightness, Contrast adjustable by client software or web browser |
| Network Storage | NAS |
| Protocols | TCP/IP, HTTP, DHCP, DNS, DDNS, RTP, RTSP, SMTP, NTP, FTP, 802.1x, Qos, IPv6 |
| Security | User authentication, IP address filter |
| Interface | 1 RJ45 10M/100M Ethernet interface |
| Operating Conditions | -30 °C ~ 60 °C (-22 °F ~ 140 °F) Humidity 95% or less (non-condensing) |
| Power Supply | 12 VDC ± 25%, PoE (802.3af) |
| IR Range | Up to 10m |
| Weight | 500g |
| Video Output | 1 × BNC |
| Lens | 2.8mm fixed lens |
Guides on how to adjust the camera's panning and tilting positions.
Explains how to find network cameras on the LAN using software.
Details on how to change the IP address, port, and other network settings.
Lists the necessary hardware and software for accessing the camera via web browser.
Step-by-step guide to accessing the camera's interface via a web browser.
Instructions for downloading and installing the necessary browser plug-in for live viewing.
To Next Page
