HIKVISION DS-2CD2412F-I User Manual

Network Camera·Quick Operation Guide
19
19
Figure 4-4 Modify Network Parameters
3. Enter the IP address of network camera in the address field of
the web browser to view the live video.
 The default value of the IP address is “192.0.0.64”. The default
user name is “admin”, and password is “12345”.
 For accessing the network camera from different subnets,
please set the gateway for the network camera after you log
in.

HIKVISION DS-2CD2412F-I Specifications

General

Model	DS-2CD2412F-I
Image Sensor	1/3" Progressive Scan CMOS
Effective Pixels	1280(H)x960(V)
Resolution	1.3 MP
Lens Mount	M12
Wide Dynamic Range	Digital WDR
Digital Noise Reduction	3D DNR
Video Compression	H.264 / MJPEG
Bit Rate	32 Kbps ~ 8 Mbps
Max. Image Resolution	1280 x 960
Alarm Input	1
Alarm Output	1
Weatherproof Rating	IP66
Type	Network Camera
Day & Night	ICR
Frame Rate	30fps @ 1280x960
Image Settings	Saturation, Brightness, Contrast adjustable by client software or web browser
Network Storage	NAS
Protocols	TCP/IP, HTTP, DHCP, DNS, DDNS, RTP, RTSP, SMTP, NTP, FTP, 802.1x, Qos, IPv6
Security	User authentication, IP address filter
Interface	1 RJ45 10M/100M Ethernet interface
Operating Conditions	-30 °C ~ 60 °C (-22 °F ~ 140 °F) Humidity 95% or less (non-condensing)
Power Supply	12 VDC ± 25%, PoE (802.3af)
IR Range	Up to 10m
Weight	500g
Video Output	1 × BNC
Lens	2.8mm fixed lens