HIKVISION DS-2CD2412F-I User Manual

Network Camera·Quick Operation Guide
18
18
You can click or on each column heading to order
the information; you can click to show the device
table and hide the network parameter panel on the right
side, or click to show the network parameter panel.
 Modify device information
Steps:
1). Select the device to be modified in the device list as shown
in Figure 4-3. The network parameters of the device will be
displayed in the Modify Network Parameters panel on the
right side as shown in Figure 4-4.
2). Edit the modifiable network parameters, e.g. IP address
and port number.
3). Enter the password of the admin account of the device in
the Password field and click to save the
changes.
Figure 4-3 Select a device

HIKVISION DS-2CD2412F-I Specifications

General

Model	DS-2CD2412F-I
Image Sensor	1/3" Progressive Scan CMOS
Effective Pixels	1280(H)x960(V)
Resolution	1.3 MP
Lens Mount	M12
Wide Dynamic Range	Digital WDR
Digital Noise Reduction	3D DNR
Video Compression	H.264 / MJPEG
Bit Rate	32 Kbps ~ 8 Mbps
Max. Image Resolution	1280 x 960
Alarm Input	1
Alarm Output	1
Weatherproof Rating	IP66
Type	Network Camera
Day & Night	ICR
Frame Rate	30fps @ 1280x960
Image Settings	Saturation, Brightness, Contrast adjustable by client software or web browser
Network Storage	NAS
Protocols	TCP/IP, HTTP, DHCP, DNS, DDNS, RTP, RTSP, SMTP, NTP, FTP, 802.1x, Qos, IPv6
Security	User authentication, IP address filter
Interface	1 RJ45 10M/100M Ethernet interface
Operating Conditions	-30 °C ~ 60 °C (-22 °F ~ 140 °F) Humidity 95% or less (non-condensing)
Power Supply	12 VDC ± 25%, PoE (802.3af)
IR Range	Up to 10m
Weight	500g
Video Output	1 × BNC
Lens	2.8mm fixed lens