Need help?Do you have a question about the HIKVISION DS-2CD2112-I and is the answer not in the manual?
General| Type | IP security camera |
|---|---|
| PTZ control | - |
| Placement supported | Outdoor |
| Connectivity technology | Wired |
| Wide Dynamic Range (WDR) | Yes |
| Form factor | Dome |
| Mounting type | Ceiling |
| Product color | White |
| Protection features | Vandal proof |
| International Protection (IP) code | IP66 |
| Total megapixels | 1.3 MP |
| Maximum resolution | 1280 x 960 pixels |
| Supported video modes | 720p |
| Video formats supported | H.264, M-JPEG |
| Supported graphics resolutions | 704 x 576, 1280 x 960, 1280 x 720 (HD 720), 640 x 480 (VGA) |
| Pan range | 0 - 355 ° |
| Tilt angle range | 0 - 65 ° |
| Camera shutter speed | 1/25 - 1/100000 s |
| Minimum illumination | 0.01 lx |
| Field of view (FOV) angle | 73.1 ° |
| Sensor type | CMOS |
| Optical sensor size | 1/3 \ |
| Optical zoom | - x |
| Focus adjustment | 2.0 |
| Fixed focal length | 12 mm |
| Password protection type | User |
| LED type | IR |
| Night vision distance | 30 m |
| Wi-Fi | No |
| Cabling technology | 10/100Base-T(X) |
| Supported network protocols | TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour |
| Ethernet LAN (RJ-45) ports | 1 |
| DC output voltage | +12V |
| Power source type | PoE |
| Power consumption (max) | 7 W |
| Operating temperature (T-T) | -30 - 60 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
Weight and Dimensions| Height | 82 mm |
|---|---|
| Weight | 500 g |
| Diameter | 111 mm |
Details on FCC compliance for digital devices and radio frequency energy.
Conditions for device compliance with FCC Part 15 rules.
Compliance with European directives (Low Voltage, EMC) and disposal instructions.
Guide to connecting camera via Local Area Network.
Guide to connecting camera via Wide Area Network.
Accessing the camera using a web browser.
Accessing the camera using client software.
Understanding the live view interface elements.
How to initiate live video streaming.
Manual recording and image capture procedures.
Controlling camera pan, tilt, and zoom functions.
Adjusting live view settings like stream type and image size.
Setting up local configuration for live view and operations.
Configuring time synchronization and DST settings.
Setting up network parameters like IP, ports, and protocols.
Adjusting video and audio stream parameters.
Adjusting image quality settings like brightness and contrast.
Setting up motion detection for alerts and recording.
Configuring tamper-proof detection for lens tampering alerts.
Setting up alarms for video signal loss.
Configuring external alarm inputs for trigger events.
Configuring alarm outputs for external devices.
Managing exceptions like HDD full or network disconnection.
Setting up email notifications for alarm events.
Configuring scheduled and event-triggered snapshots.
Setting up Network-Attached Storage for recording.
Setting up schedules for video recording.
Creating, modifying, and deleting user accounts and permissions.
Securing video stream data using RTSP authentication.
Displaying detailed device information and status.
Performing essential camera maintenance tasks.
Configuring RS-232 serial port for parameter control or transparent channel.
Configuring RS-485 serial port for PTZ control.
Overview of the SADP software's features and capabilities.
How to automatically search for online network devices.
Steps to modify network parameters of discovered devices.
Procedure to restore the default password for the device.
To Next Page
