HIKVISION DS-2CD2142FWD-IWS User Manual

0
Network Dome Camera
Quick Start Guide

HIKVISION DS-2CD2142FWD-IWS Specifications

General

Brand	HIKVISION
Model	DS-2CD2142FWD-IWS
Category	Security Camera
Language	English

Summary

Safety Instruction

Warnings

Highlights critical safety precautions that, if neglected, can lead to serious injury or death.

Cautions

Lists safety precautions that, if neglected, may cause injury or equipment damage.

Installation

2.1 Memory Card Installation

2.2 Ceiling Mounting

2.3 Mounting with Brackets

2.3.1 Wall Mounting

2.3.2 Wall Mounting with Junction Box

2.3.3 Pendant Mounting

2.3.4 Incline Mounting

Set the Network Camera over the LAN

3.1 Wiring

3.2 Activate the Camera

Explains the mandatory process of activating the camera by setting a strong password.

3.2.1 Activation via Web Browser

Step-by-step guide to activate the camera using a web browser interface.

3.2.2 Activation via SADP Software

Instructions for activating the camera using the SADP software tool.

3.3 Modify the IP Address

Procedures to change the camera's IP address for network configuration using SADP software.

Access via Web Browser

Operate via Hik-Connect App

5.1 Enable Hik-Connect Service on Camera

Steps to enable the Hik-Connect service on the camera, required before app integration.

5.1.1 Enable Hik-Connect Service via SADP Software

Guide to enable Hik-Connect service using the SADP software.

5.1.2 Enable Hik-Connect Service via Web Browser

Instructions for enabling Hik-Connect service through the camera's web browser interface.

5.2 Hik-Connect Setup

5.3 Add Camera to Hik-Connect

5.4 Initialize the Memory Card