Need help?Do you have a question about the HIKVISION DS-2CD2110-I and is the answer not in the manual?
General| Sensor Type | CMOS |
|---|---|
| IR Range | Up to 30 m |
| Ingress Protection | IP66 |
| Image Sensor | 1/3" Progressive Scan CMOS |
| Lens | 2.8 mm / 4 mm / 6 mm |
| Day & Night | IR cut filter |
| Minimum Illumination | 0.01 Lux @ (F1.2, AGC ON), 0 Lux with IR |
| Video Compression | H.264 |
| Network Interface | RJ45 10M/100M Ethernet |
| Power Supply | 12 VDC ± 25%, PoE (802.3af) |
| Operating Conditions | -30 °C to 60 °C (-22 °F to 140 °F) |
| Camera Type | Dome |
| Resolution | 720P (1280×720) |
| Frame Rate | 30fps(1280 × 720) |
| Weight | 500g |
Covers FCC compliance, conditions, and EU conformity statements.
Explains warnings, cautions, and their implications with visual indicators.
Covers electrical safety regulations, input voltage requirements, and general warnings.
Details warnings for power adapters, connections, and device malfunction indicators.
Provides cautions for handling, environmental conditions, and laser exposure.
Describes network connection, software tools (SADP/PCNVR), and IP address acquisition.
Details how to change IP address and subnet mask using SADP software.
Explains selecting a device and modifying its network parameters like IP address and port.
Lists the operating system, CPU, RAM, display, and browser requirements for access.
Details the steps for accessing the camera via a web browser, including login.
Guides the user through downloading and installing the necessary browser plug-in for camera management.
To Next Page