Need help?Do you have a question about the HIKVISION DS-2CD2121G0-IWS/2AX and is the answer not in the manual?
General| Brand | HIKVISION |
|---|---|
| Model | DS-2CD2121G0-IWS/2AX |
| Category | Security Camera |
| Language | English |
Details on FCC compliance, designed to provide reasonable protection against harmful interference.
Confirms product compliance with harmonized European standards and directives.
Information regarding compliance with Canadian standards for digital devices and radio frequency emissions.
Critical safeguards to prevent serious injury or death from product misuse.
Precautions to prevent potential injury or material damage to the product.
Overview and description of the Type I camera appearance, including key parts.
Overview and description of the Type II camera appearance, including key parts.
Overview and description of the Type III camera appearance, including key parts.
Overview and description of the Type IV camera appearance, including key parts.
Overview and description of the Type V camera appearance, including key parts.
Procedure for mounting and unmounting a memory card for local storage on compatible camera models.
Detailed instructions for securely mounting the camera onto a ceiling surface.
Covers various bracket mounting types: wall, wall with junction box, pendant, and incline.
Procedure for installing a waterproof accessory for outdoor network cable connections.
Guides on connecting the camera to the network directly or via a switch/router.
Steps to activate the camera by setting a strong password, using web browser or SADP software.
Procedure for changing the camera's IP address using SADP software for network configuration.
Lists the necessary hardware and software specifications for accessing the camera via web browser.
Procedure to enable the Hik-Connect service via SADP software or web browser.
Instructions for downloading, installing, and registering for a Hik-Connect user account.
Steps to link the network camera to your Hik-Connect account via QR code or serial number.
Process to initialize the memory card within the camera's device settings for recording.
To Next Page