HIKVISION DS-2CD2121G0-IWS/2AX User Manual

Network Dome Camera·Quick Start Guide
57
57
5.4 Initialize the Memory Card
Steps:
Check the memory card status by tapping on the Storage Status in
the Device Settings interface.
If the memory card status displays as Uninitialized, tap to initialize
it. The status will then change to Normal. You can then start
recording any event triggered video in the camera such as motion
detection.

HIKVISION DS-2CD2121G0-IWS/2AX Specifications

General

Brand	HIKVISION
Model	DS-2CD2121G0-IWS/2AX
Category	Security Camera
Language	English