Network Dome Camera·Quick Start Guide 
 
4 Access via Web Browser 
System Requirement: 
Operating System: Microsoft Windows XP SP1 and above version   
CPU: 2.0 GHz or higher 
RAM: 1G or higher 
Display: 1024×768 resolution or higher 
Web Browser: Internet Explorer 8.0 and above version, Apple Safari 
5.0.2 and above version, Mozilla Firefox 5.0 and above version and 
Google Chrome 18 and above version 
Steps: 
1. Open the web browser. 
2. In the browser address bar, input the IP address of the network 
camera, and press the Enter key to enter the login interface. 
Note: 
The default IP address is 192.168.1.64. You are recommended 
to change the IP address to the same subnet with your 
computer. 
3. Input the user name and password. 
The admin user should configure the device accounts and 
user/operator permissions properly. Delete the unnecessary 
accounts and user/operator permissions. 
Note: 
The device IP address gets locked if the admin user performs 7 
failed password attempts (5 attempts for the user/operator).