Need help?Do you have a question about the HIKVISION DS-2CD2532F-IS and is the answer not in the manual?
General| Fixed focal length | 6 mm |
|---|---|
| Maximum aperture number | 2 |
| Pan range | -30 - 30 ° |
| Tilt angle range | 0 - 75 ° |
| Angle of rotation | 360 ° |
| Camera shutter type | Electronic |
| Camera shutter speed | 1/3 - 1/100000 s |
| Minimum illumination | 0 lx |
| Field of view (FOV) angle | 43.3 ° |
| Type | IP security camera |
| Placement supported | Outdoor |
| Connectivity technology | Wired |
| Wide Dynamic Range (WDR) | Yes |
| Form factor | Dome |
| Mounting type | Ceiling |
| Product color | White |
| International Protection (IP) code | IP66 |
| Total megapixels | 3 MP |
| Maximum resolution | 2048 x 1536 pixels |
| Supported video modes | 1080p |
| Image quality adjustment | Brightness, Contrast, Saturation |
| Video compression formats | H.264, M-JPEG |
| Supported graphics resolutions | 1920 x 1080 (HD 1080), 2048 x 1536 (QXGA) |
| Sensor type | CMOS |
| Optical sensor size | 1/3 \ |
| Password protection type | User |
| Built-in HDD | No |
| Compatible memory cards | MicroSD (TransFlash), MicroSDHC, MicroSDXC |
| Maximum memory card size | 128 GB |
| LED type | IR |
| Night vision distance | 10 m |
| Cabling technology | 10/100Base-T(X) |
| Ethernet interface type | Fast Ethernet |
| Supported network protocols | TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour |
| Number of cameras | 1 |
| Operating temperature (T-T) | -30 - 60 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
| DC output voltage | 12 |
| Power source type | PoE |
| Power consumption (max) | 5 W |
| Audio system | 2-way |
| Audio formats supported | G.711, G.726 |
| Interface | RJ-45 |
| Lens mount interface | M12 |
Weight and Dimensions| Depth | 96.7 mm |
|---|---|
| Width | 99.3 mm |
| Height | 52.8 mm |
| Weight | 600 g |
Details on FCC compliance and conditions for operation.
Information on CE marking and compliance with EU directives.
Precautions divided into warnings for serious injury/death and cautions for equipment damage.
Steps to connect and configure the camera on a Local Area Network.
Steps to connect and configure the camera on a Wide Area Network.
Detailed steps to access the camera using a web browser.
Guidance on accessing the camera using client software like iVMS-4200.
Setup for Wi-Fi connection in managed or ad-hoc network modes.
Simplified Wi-Fi setup using the WPS function.
Configuring TCP/IP settings for wireless network connectivity.
Overview of the live view interface elements and functionalities.
Steps to initiate and begin viewing the live video feed.
Manual methods for recording video and capturing still images.
How to control the camera's pan, tilt, and zoom functions.
Setting local parameters for live view, record, and captured pictures.
Configuring time synchronization and DST settings for the camera.
Detailed configuration of TCP/IP, ports, PPPoE, DDNS, SNMP, 802.1X, and QoS.
Adjusting video stream types, resolutions, frame rates, and audio parameters.
Settings for image quality, display, OSD, privacy masks, and overlays.
Setting up various detection events and their corresponding alarm actions.
Setting up Network-Attached Storage for recording files.
Scheduling continuous, motion-triggered, or alarm-triggered recordings.
Configuring timed or event-triggered snapshots and FTP uploads.
Creating, modifying, and deleting user accounts with specific permissions.
Securing live view stream data using RTSP authentication.
Allowing access without username and password, typically for live view.
Controlling access based on IP address, allowing or forbidding specific IPs.
Displaying model, serial number, firmware version, and other device details.
Procedures for rebooting, restoring defaults, exporting/importing configurations, and upgrading firmware.
Configuring serial port settings for parameter configuration or transparent channel.
Configuring serial port settings for PTZ control.
To Next Page
