Need help?Do you have a question about the HIKVISION DS-2CD2423G0-I and is the answer not in the manual?
General| Number of lenses | 1 |
|---|---|
| Fixed focal length | 2.8 mm |
| Maximum aperture number | 2 |
| Minimum aperture number | 1.2 |
| Noise reduction | Yes |
| Total megapixels | 2 MP |
| Gain control type | Auto |
| Maximum resolution | 1920 x 1080 pixels |
| Image quality adjustment | Brightness, Contrast, Saturation, Sharpness |
| Video compression formats | H.264, H.264+, H.265, H.265+, M-JPEG |
| Noise reduction technology | 3D noise reduction |
| Supported graphics resolutions | 320 x 240, 352 x 240, 640 x 360, 640 x 480 (VGA), 1280 x 720 (HD 720), 1280 x 960, 1920 x 1080 (HD 1080) |
| Sensor type | CMOS |
| Optical sensor size | 1/2.7 \ |
| Pan range | 0 - 360 ° |
| Tilt angle range | 0 - 90 ° |
| Angle of rotation | 360 ° |
| Camera shutter speed | 1/3 - 1/100000 s |
| Minimum illumination | 0 lx |
| Type | IP security camera |
| Languages support | Multi |
| Number of languages | 32 |
| Placement supported | Indoor |
| Connectivity technology | Wired |
| Built-in HDD | No |
| Compatible memory cards | MicroSD (TransFlash), MicroSDHC, MicroSDXC |
| Maximum memory card size | 128 GB |
| Alert notification type | |
| Intelligent Video Surveillance (IVS) system features | Face detection |
| Number of users | 32 user(s) |
| User access level | Administrator, Operator, User |
| Cabling technology | 10/100Base-T(X) |
| Networking standards | IEEE 802.1x, IEEE 802.3af |
| Ethernet interface type | Fast Ethernet |
| Supported network protocols | TCP/IP, UDP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, UDP, Bonjour, SSL/TLS |
| Sample rate | 48 kHz |
| Voice codecs | G.711alaw, G.711ulaw, G.722.1, G.726, MP2L2, PCM |
| Behavior analysis | Intrusion detection, Line crossing detection |
| Operating temperature (T-T) | -10 - 40 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
| DC output current | 0.5 A |
| DC output voltage | 12 |
| Power source type | DC, PoE |
| Power consumption (max) | 6 W |
| Power consumption (Power over Ethernet (PoE)) | 7 W |
| LED type | IR |
| Infra-red wavelength | 850 nm |
| Night vision distance | 10 m |
| Form factor | Cube |
| Mounting type | Desk |
| Product color | Black, White |
| Housing material | Plastic |
Weight and Dimensions| Depth | 32.6 mm |
|---|---|
| Width | 65.2 mm |
| Height | 102.8 mm |
| Weight | 128 g |
Details FCC compliance for the device, including testing and limits for Class B digital devices.
Specifies the two conditions under which the device complies with FCC rules.
States compliance with European standards and directives like EMC, RoHS, and RE.
Confirms compliance with Industry Canada's ICES-003 standards for digital devices.
Details compliance with Industry Canada's license-exempt RSS standards for radio devices.
Follow these safeguards to prevent serious injury or death.
Follow these precautions to prevent potential injury or material damage.
Describes the appearance of Type I and Type II network cube cameras with illustrations.
Details the appearance of the Type III network cube camera, including a diagram.
Instructions for installing a memory card into the camera, with steps for different types.
Provides instructions for mounting the Type I and Type II cameras, including stand and ceiling options.
Details the steps for wall or ceiling mounting of the Type III camera, including adapter plate installation.
To Next Page