Need help?Do you have a question about the HIKVISION DS-2CD2452F-IW and is the answer not in the manual?
General| Image Sensor | 1/3" Progressive Scan CMOS |
|---|---|
| Resolution | 1080p |
| Min. Illumination | 0.01 Lux @(F1.2, AGC ON), 0 Lux with IR |
| Lens Type | Fixed |
| Lens Mount | M12 |
| IR Range | Up to 10m |
| IR Distance | 10m |
| Wide Dynamic Range | Digital WDR |
| Digital Noise Reduction | 3D DNR |
| Video Compression | H.264/MJPEG |
| Wireless Standards | IEEE 802.11b/g/n |
| Alarm Input | 1 |
| Alarm Output | 1 |
| Operating Conditions | -30 °C ~ 60 °C (-22 °F ~ 140 °F), Humidity 95% or less (non-condensing) |
| Audio | Two-way audio |
| Protection | IP66 |
| Camera Type | Network Camera |
| Max Resolution | 1920x1080 |
| Effective Pixels | 2MP |
| Lens | 4mm, optional: 2.8mm, 6mm |
| Day & Night | ICR |
| Video Bit Rate | 32 Kbps ~ 8 Mbps |
| Image Settings | Brightness, Contrast, Saturation, Sharpness |
| Network Storage | Micro SD card, up to 128 GB |
| Frequency Range | 2.4GHz ~ 2.4835GHz |
| Communication Interface | Wi-Fi |
| Network Interface | 1 RJ45 10M/100M Ethernet interface |
| Power Supply | 12 VDC ± 10%, PoE (802.3af) |
| Power Consumption | Max. 5W |
To Next Page