User Manual of Network Camera
64
6.6.1 Configuring Motion Detection
Purpose:
Motion detection detects the moving objects in the configured surveillance area, and
triggers the certain action as a respond to detection.
In order to detect the moving objects accurately and reduce the false alarm rate,
normal configuration and expert configuration are selectable for different motion
detection environment.
Normal Configuration
Normal configuration adopts one set of parameter for motion detection during the day
and at night.
Tasks:
1. Set the Motion Detection Area.
Steps:
(1)Enter the motion detection settings interface
Configuration > Advanced Configuration> Events > Motion Detection
(2)Check the checkbox of Enable Motion Detection.
(3)Check the checkbox of Enable Dynamic Analysis for Motion if you want to
mark the detected objects with green rectangles.
Note: Select Disable for rules if you don’t want the detected objected
displayed with the rectangles. Select disable from Configuration-Local
Configuration-Live View Parameters-rules.
To Next Page
Loading...
