HIKVISION DS-2CD2452F-IW User Manual

User Manual of Network Camera
73
Figure 6-43 Alarm Output Settings
6.6.5 Handling Exception
The exception type can be HDD full, HDD error, network disconnected, IP address
conflicted and illegal login to the cameras.
Steps:
1. Enter the Exception Settings interface:
Configuration > Advanced Configuration> Events > Exception
2. Check the checkbox to set the actions taken for the Exception alarm. Refer to
Task 3 Set the Alarm Actions Taken for Motion Detection in Section 6.6.1.

HIKVISION DS-2CD2452F-IW Specifications

General

Brand	HIKVISION
Model	DS-2CD2452F-IW
Category	Security Camera
Language	English