HIKVISION DS-2CD2112-I

User Manual of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
66
1. Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or Configuration > Advanced Configuration> System > Maintenance
2. Click or to restore the default settings.
Figure 9-8 Restore Default Settings
Note: After restoring the default settings, the IP address is also restored to
the default IP address, please be careful for this action.
9.4.3 Importing/Exporting Configuration File
Steps:
Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or Configuration > Advanced Configuration> System > Maintenance
1. Click to select the local configuration file and then click to
start importing configuration file.
Note: You need to reboot the camera after importing configuration file.
2. Click and set the saving path to save the configuration file in local
storage.
Figure 9-9 Import/Export Configuration File
9.4.4 Upgrading the System
Steps:
1. Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or Configuration > Advanced Configuration> System > Maintenance
2. Click to select the local upgrade file and then click to start