3 Installation
Read the following contents carefully before the installation.
Make sure that all the related equipment is power-off during
the installation.
Check whether the power supply is matched with your AC
outlet to avoid damage.
If the product does not function properly, please contact your
dealer or the nearest service center. Do not disassemble the
camera for repair or maintenance by yourself.
Make sure the installation location does not have reflective
surfaces of objects close to the camera. The IR light from the
camera may reflect back into the lens causing reflection.
The cube camera can be installed on wall, ceiling or table. Ceiling
mounting is taken as an example in this section; if you adopt wall
mounting or table mounting, you can also take below procedure as
a reference.
Steps:
1. Open the cover on the mounting base from the bracket.
To Next Page
Loading...
Need help?
General
