Solution:
Solution:
1. Blurring of the right image is caused by water stains on the outer surface of the glass or
dome. This is a normal natural phenomenon. If you need to solve it, it is recommended to
use the device with wiper function.
2. Left picture is fogging or condensation in the inner surface of the glass or dome. It is
necessary to check whether the installation is correct, or it is caused by the malfunction
of the cover or camera. For outdoor bullet cameras and domes, it is recommended to
return to after sales.
3. The general feedback about inner fogging and condensation is outdoor domes and bullet
cameras. This kind of problem is often caused by improper installation or watering of the
product itself.
To Next Page
Loading...
