HIKVISION DS-2CE10DFT-F

 Keep the camera away from liquid while in use for
non-water-proof device.
 While in delivery, the camera shall be packed in its
original packing, or packing of the same texture.
Mark Description
Table 0-1 Mark Description
Mark
Description
DC Voltage
1 Introduction
1.1 Product Features
The main features are as follows:
 High performance CMOS sensor
 Full time color
 OSD menu with configurable parameters
 Auto white balance
 Internal synchronization
 Smart light mode
 3-axis adjustment
1.2 Overview
This manual applies to two types of bullet camera.
The overviews of each type are shown in the figures
below.
1.2.1 Overview of Type I Camera
DC12VIN
Switch Button
Power Cord
Video Cable
Bracket
Main Body
Lens
White Light
Figure 1-1 Overview of Type I Camera
Note:
Press and hold the switch button for 5 seconds to switch
the video output. Four kinds of video outputs are
available: TVI, AHD, CVI, and CVBS.
1.2.2 Overview of Type II Camera
DC12 VIN
Lens
Main Body
Breaket
Switch Button
Power Cord
12 VDC
Video Cable
White Light
Figure 1-2 Overview of Type II Camera Installation
Note:
Press and hold the switch button for 5 seconds to switch
the video output. Four kinds of video outputs are
available: TVI, AHD, CVI, and CVBS.