Do you have a question about the HIKVISION DS-2CE78H0T-IT3F and is the answer not in the manual?
Lens Type | Fixed Lens |
---|---|
Lens Mount | M12 |
Signal System | PAL / NTSC |
Day & Night | ICR |
Minimum Illumination | 0.01 Lux @ (F1.2, AGC ON), 0 Lux with IR |
Weatherproof Rating | IP67 |
Power Supply | 12 V DC ± 25% |
Camera Type | Turret |
Resolution | 1920 x 1080 |
Lens Focal Length | 2.8 mm / 3.6 mm / 6 mm |
Operating Conditions | -40 °C to 60 °C |
Information regarding FCC compliance and potential interference for Class A digital devices.
Specifies the two conditions for compliance with FCC Part 15 rules for device operation.
Confirms product conformity with EU directives for Low Voltage and EMC.
States compliance with Industry Canada ICES-3 (A)/NMB-3(A) standards.
Alerts users about potential radio interference in domestic environments for Class A products.
Provides essential safety instructions, differentiating between warnings for serious injury and cautions for damage.
Highlights key features such as High Performance CMOS Sensor, OSD menu, and 3-Axis Adjustment.
Presents a general overview and component breakdown of Type I and Type II camera models.
Detailed steps for installing the Type I camera, including ceiling/wall mounting with or without a junction box.
Detailed steps for installing the Type II camera, including ceiling/wall mounting without a junction box.
Configuration options for setting the video format, including resolution and frame rate (e.g., 5 MP, 4 MP, 2 MP).
Guides on adjusting exposure parameters: Exposure Mode (Global, BLC, HLC, DWDR), Shutter, and AGC.
Settings for Day/Night mode (Color, B&W, Auto), IR Light, Smart IR, and D/N Thresholds.
Adjustments for Image Mode, White Balance, Brightness, Contrast, Sharpness, Saturation, DNR, and Mirror.
Procedure to reset all camera settings to their original factory default values.
Option to exit the camera menu without saving any changes made during the session.
Saves the current configuration settings and then exits the camera menu.