Need help?Do you have a question about the HIKVISION Wiegand DS-2CD4A26FWD-IZS/P-WG and is the answer not in the manual?
General| Model | DS-2CD4A26FWD-IZS/P-WG |
|---|---|
| Type | Network Camera |
| Sensor Type | 1/2.8" Progressive Scan CMOS |
| Max Resolution | 1920 × 1080 |
| WDR | 120 dB |
| Video Compression | H.265+/H.265/H.264+/H.264 |
| Wiegand Interface | Yes |
| Ingress Protection | IP67 |
| Day/Night | ICR |
| Lens | 2.8 to 12 mm |
| IR Range | Up to 30 m |
| Audio Compression | G.711/G.726 |
| Operating Conditions | -30 °C to 60 °C (-22 °F to 140 °F) |
| Power Supply | 12 VDC ± 25% |
| Interface | 1 RJ45 10M/100M Ethernet interface |
| Power Consumption | 12.5 W |
Lists the specific Hikvision camera models compatible with Wiegand.
Details key technical specifications of the Wiegand cameras.
Illustrates the physical Wiegand interface and connection details.
Explains how to map license plates to access control card numbers for security systems.
Guides on setting Wiegand type to CardID 26bit for access control integration.
Steps to activate and configure vehicle detection settings within the camera.
Instructions for managing access lists by importing blacklist and whitelist templates.
Setup guide for automatic updates of access lists using FTP.
Explains how to transfer license plate numbers using the Wiegand interface.
Steps to set the Wiegand type to Paxton 26bit for specific integrations.
Guides on connecting the ANPR camera to the Paxton Net2 ACU.
Wiring instructions for connecting the ANPR camera to the Net2 ACU reader port.
Procedure to view captured license plate images within the Net2 interface.
Details on configuring door settings within the ACU for ANPR integration.
Steps to add a new token, specifying vehicle number plate, in the user record.
Instructions for downloading a plugin and integrating the Hikvision DVR System with Net2.
To Next Page