Wiegand Camera ·Operation Manual
9
Figure 3-6 Blacklist & Whitelist Interface
Last Update shows the latest update time.
Upload Info shows the rules to configure via FTP.
2. Configure FTP Server.
Steps:
1. Go to Configuration -> Network -> Advanced Settings -> FTP
2. Fill in the blanks based on the authority distributed by FTP Server.
3. Set the Directory Structure as Save in the root directory.
Figure 3-7 Network Advance Settings
3. Test
Adjust the device time of few seconds prior to the FTP auto update time. Then
the device can update the Blacklist & Whitelist.
To Next Page
Loading...
