Need help?Do you have a question about the HIKVISION Smart-Linkage PTZ and is the answer not in the manual?
General| Image Sensor | 1/2.8" progressive scan CMOS |
|---|---|
| Ingress Protection | IP66 |
| Noise Reduction | 3D DNR |
| Optical Zoom | 25× |
| Digital Zoom | 16x |
| Pan Range | 360° |
| Tilt Range | -15° to 90° |
| IR Distance | 100 m |
| Smart Features | Intrusion Detection |
| Video Compression | H.265/H.264/H.264+ |
| Audio Compression | G.711/G.726/AAC |
| Power | PoE (802.3at) |
| Min. Illumination | Color: 0.005 lux, B/W: 0.001 lux |
| Lens | Varifocal |
| Bit Rate | 32 Kbps to 16 Mbps |
| Wide Dynamic Range | 120 dB WDR |
| Interface | 1 channel In/Out |
| Network Interface | 1 RJ45 10M/100M Ethernet interface |
| Power Supply | PoE+ (IEEE 802.3at) |
| Power Consumption | 18 W (max. 25.5 W with heater on) |
| Operating Conditions | Humidity 95% or less (non-condensing) |
Indicates important information for proper product usage and understanding.
Alerts users to potential hazards or situations that could lead to injury.
Indicates actions that are prohibited to ensure safety and correct operation.
Denotes the proper or recommended procedure or state.
Denotes an improper or not recommended procedure or state.
Instruction to proceed to a specific step or section labeled 'A'.
Indicates an accessory that may not be included or may vary in quantity.
Refers to the use or requirement of a MicroSD card for storage.
Relates to the proper grounding of the device for electrical safety.
Provides instructions or information regarding the disposal of the product.
Indicates items that are not included and must be purchased independently.
Location for inserting a memory card into the device.
Instructions for using the reset button to restore default settings.
Refers to the connection via a network cable.
Information regarding the RS-485 communication interface.
Details about the power cable connection and usage.
Covers alarm input/output and audio interface connections.
Details on how to configure and use the alarm output functionality.
Information on the relay output and its application.
Description of the DC load specification or connection.
Guidance on the appropriate power supply for the device.
Specific information about the JQC-3FG relay component.
Measures for safe and effective installation in outdoor environments.
Steps to activate and access the network camera.
Details on FCC compliance, testing, and conditions for operation.
Information regarding EU directives (EMC, RoHS, WEEE) and product marking.
Statement of compliance with Industry Canada ICES-003 standards.
Adherence to local laws, electrical safety, and fire prevention regulations.
Precautions for electrical safety, including fuse replacement.
Warnings and precautions regarding battery handling, replacement, and disposal.
Guidelines to prevent fire hazards, such as avoiding naked flame sources.
Alerts users about hot parts and necessary precautions when handling.
Information for devices intended for installation in restricted access locations.
Instructions for secure and proper installation of the equipment.
Recommendations for transporting the device safely in its packaging.
Details on selecting and using the correct power supply for the device.
User responsibility for configuring device passwords and security settings.
Guidance on product maintenance, troubleshooting, and cleaning procedures.
Information on suitable operating environments and conditions to avoid.
Precautions related to the device's illuminator and optical radiation.
Actions to take in case of device malfunction like smoke, odor, or noise.
Instructions for setting up and synchronizing the device time.
To Next Page