EasyManuals Logo
Home>HIKVISION>Security Camera>DS-2DE1A400IW-DE3

HIKVISION DS-2DE1A400IW-DE3 User Manual

HIKVISION DS-2DE1A400IW-DE3
117 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
User Manual of Network PTZ Camera
© Hikvision
12
The obtained IP address is dynamically assigned via PPPoE, so the IP address always changes after
rebooting the camera. To solve the inconvenience of the dynamic IP, you need to get a domain
name from the DDNS provider (E.g. DynDns.com). Follow the steps below for normal domain
name resolution and private domain name resolution to solve the problem.
Normal Domain Name Resolution
Steps:
1. Apply a domain name from a domain name provider.
2. Configure the DDNS settings in the DDNS Settings interface of the network camera. Refer to
Section 6.1.1 Configuring DDNS Settings for detailed configuration.
3. Visit the camera via the applied domain name.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-2DE1A400IW-DE3 and is the answer not in the manual?

HIKVISION DS-2DE1A400IW-DE3 Specifications

General IconGeneral
BrandHIKVISION
ModelDS-2DE1A400IW-DE3
CategorySecurity Camera
LanguageEnglish

Related product manuals