HIKVISION DS-2DE1A400IW-DE3 User Manual

User Manual of Network PTZ Camera
© Hikvision
100
6.4.3 Security
Configuring Authentication Security
Purpose:
You can specifically secure the stream data of live view.
Steps:
1. Enter the Authentication interface:
Configuration> System> Security > Authentication
2. Set the RTSP Authentication/WEB Authentication type from the dropdown list. Digest and
digest/basic are selectable.
3. Click to save the settings.
Configuring IP Address Filter
Purpose:
With this function on, the camera allows certain IP addresses whether to log in or not.
Steps:
1. Enter IP Address Filter interface:
Configuration > System > Security > IP Address Filter
Figure 6-53 IP Address Filter
2. Check the checkbox of Enable IP Address Filter.
3. Select the type of IP Address Filter in the dropdown list, Forbidden and Allowed are
selectable.
4. Set the IP Address Filter list.
 Add an IP Address

HIKVISION DS-2DE1A400IW-DE3 Specifications

General

Brand	HIKVISION
Model	DS-2DE1A400IW-DE3
Category	Security Camera
Language	English