HIKVISION DS-2DE2C200SCG-E - Time, Date, and Connection Settings

Firmware Directory Locate the directory which the upgrade le belongs to.
3.
Click Browse to select the upgrade le.
4.
Click Upgrade.
10.8 View Open Source Soware License
Go to Conguraon → System → System Sengs → About Device , and click View Licenses.
10.9 Set Live View Connecon
It controls the remote live view connecon amount.
Live view connecon controls the maximun live view that can be streamed at the same me.
Enter Conguraon → System → Maintenance → System Service to set the upper limit of the
remote
connecon number.
10.10 Time and Date
You can congure me and date of the device by conguring me zone, me synchronizaon and
Daylight Saving Time (DST).
10.10.1 Synchronize Time Manually
Steps
1.
Go to
Conguraon → System → System Sengs → Time Sengs .
2.
Select Time Zone.
3.
Click Manual Time Sync..
4.
Choose one
me synchronizaon method.
-
Select Set Time, and manually input or select date and me from the pop-up calendar.
-
Check Sync. with computer
me to synchronize the me of the device with that of the local
PC.
5.
Click Save.
10.10.2 Set NTP Server
You can use NTP server when accurate and reliable
me source is required.
Before You Start
Set up a NTP server or obtain NTP server informaon.
Network Speed Dome User Manual
79