Thermal & Optical Bi-spectrum Network Camera User Manual
21
Scene Modes
The scene mode is set to be General by default. Select Distant View when you are far from the
targets. Select Indoor when you are indoor.
Restore Parameters
Restore Default
Click Restore to restore the parameters to the default.
Restart VCA
Click Restartto restart the VCA function.
5.6 Set Global Size Filter
Targets larger or smaller than the set size range are filtered out. The settings is valid for all
perimeter protection rules.
Steps
1. Go to Configuration → Perimeter Protection → Advanced Configuration to enable the function.
2. Click to draw a maximum size frame on live image.
3. Click to draw a minimum size frame on live image.
4. Click Save.
To Next Page
Loading...
