5.2.3 Exposure Settings
Exposure is controlled by the combination of iris, shutter, and photo sensibility. You can
adjust image effect by setting exposure parameters.
In manual mode, you need to set Exposure Time, Gain and Slow Shutter.
5.2.4 Day/Night Switch
Day/Night Switch function can provide color images in the day mode and turn on ll light in
the night mode. Switch mode is congurable.
Day
The image is always in color.
Night
The supplement light will be enabled to ensure clear live view image at night.
Auto
The camera switches between the day mode and the night mode according to the
illumination automatically. The higher the Sensitivity is, the easier the mode switches.
The Filtering Time refers to the time interval between the mode switches.
Scheduled-Switch
Set the Start Time and the End Time to
dene the duration for day mode.
Note
Day/Night Switch function varies according to models.
5.2.5 Set Supplement Light
Steps
1.
Go to Conguration > Maintenance > System Service .
2.
Check Enable Supplement Light.
3.
Click Save.
4.
Go to
Conguration > Image > Display Settings > Day/Night Switch to set supplement
light parameters.
Smart Supplement Light
This feature uses smart image processing technology to reduce overexposure caused
by supplement light.
Smart Supplement Light Mode
Enable or disable the smart supplement light.
Brightness Limit
Thermal & Optical Bi-spectrum Network Camera User Manual
34
To Next Page
Loading...
Need help?
General
