Figure 7-48 Optical Image Stabilization
Figure 7-49 Electronic Image Stabilization
Video Adjustment
Mirror
If you turn the MIRROR function on, the image will be flipped. It is like the image in the
mirror. The flip direction can be set to OFF or CENTER.
This function varies depending on the models of speed dome.
Video Standard
You can set the Video Standard to 50hz(PAL) or 60hz(NTSC) according to the video system in
your country.
This function varies depending on the models of speed dome.
Capture Mode
You can disable this function or select the capture mode from the list..
This function varies depending on the models of speed dome.
Other
Lens Initialization
The lens operates the movements for initialization when you check the check box of Lens
Initialization.
Zoom Limit
You can set Zoom Limit value to limit the maximum value of zooming. The value can be
selected from the list.
Local Output
You can enable or disable the video output through the BNC interface on your demand.
The functions vary depending on the models of speed dome.
To Next Page
Loading...
Need help?
General
