Need help?Do you have a question about the HIKVISION DS-2DF5284-A and is the answer not in the manual?
General| Camera Type | PTZ Dome Camera |
|---|---|
| Signal System | PAL/NTSC |
| Gain | Auto / Manual |
| Number of Preset | 256 |
| Patrol | 8 patrols, up to 32 presets per patrol |
| IR Distance | Up to 100m |
| Alarm Input/Output | 1/1 |
| Minimum Illumination | 0.005 Lux (Color), 0.001 Lux (B/W) |
| Video Compression | H.264 / MJPEG |
| White Balance | Auto / Manual / Indoor / Outdoor |
| Digital Zoom | 16x |
| Auto Focus | Yes |
| Pan Range | 360° |
| Tilt Range | -5° - 90° |
| Tilt Speed | 0.1° to 200°/s |
| Proportional Zoom | Yes |
| Power-off Memory | Yes |
| IR intensity | Auto/Manual |
| Input & Output | 1/1 |
| Network Interface | RJ45 10M/100M Ethernet |
| Protocol | HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, SMTP, NTP, UPnP, SNMP, 802.1X, QoS, IPv6, Bonjour |
| User/Host Level | Up to 32 users, 3 levels |
| Security Measures | HTTPS, 802.1X, IP address filtering, user authentication |
| Operating Conditions | -30 °C - 65 °C (-22 °F - 149 °F), Humidity 90% or less |
| Protection Level | IP66 |
| Pan/Tilt Range | 360° continuous pan, -15° to 90° tilt |
Safety warnings to prevent injury or death.
Safety cautions to prevent equipment damage.
Accesses the primary operational menu of the speed dome.
Accesses various system configuration settings.
Configures soft address, date/time, zero point, and display settings.
Configuration of the device's IP address and subnet mask.
Covers core camera settings like autofocus, zoom, shutter, and exposure.
Configures motion detection and park action settings.
Details exposure mode, iris, shutter, gain, exp comp, image flip, white balance.
Configures proportional pan, park time, park action, scan speed, preset freeze frame.
Configures patrol paths by setting presets, dwell time, and speed.
Manages window numbering, enabling, settings, and clearing.
Instructions for accessing and configuring the dome via Internet Explorer.
Steps for configuring network parameters via IE browser.
Steps for configuring the dome using the iWMS-4000 client software.
Client software interface for viewing live camera feeds.
Accessing the main menu from the client software preview interface.
Feature for precise PTZ control using mouse interaction in client software.
Configures patrol sequences with presets, dwell time, and speed.
Uses SADP software to find network devices on LAN.
Allows editing IP, subnet mask, port, and password of devices.
Resets the administrator password to default.
Details safety measures against lightning and surges.
To Next Page