5 Inch Network High-definition Speed Dome User Manual
23
3.3.10 CLEAR
Refer to Figure 3.3.23 for the CLEAR settings menu.
Use this menu to clear all user-defined settings, including presets, patrols, patterns and privacy mask.
<CLEAR>
<CLEAR ALL PRESETS>
<CLEAR ALL PATROLS>
<CLEAR ALL PATTERNS>
<CLEAR ALL PRIVACY MASK>
BACK EXIT
Figure 3.3.23
3.4 FACTORY SETTINGS
Use this function to reset all dome settings to factory default parameters, including:
Dome Address 0
Baud Rate 2400bps
120Ω matching resistance Off
Soft Address Off
Azimuth Zero Zero angle
Auto Focus On
Zoom Limit Max Optical Zoom
Zoom Speed High
Low Light Limit Off
IR Cut Filter Auto
Backlight Comp Off
AE Mode Auto
Exposure Comp/Noise Reduce 0
White Balance Auto
Auto Flip Auto
Proportion Pan On
Park Time 5 seconds
Park Action None
Scan speed 28 °/second
Preset Image Freeze Off
Limit Stops Off
To Next Page
Loading...
Need help?
General
