5 Inch Network High-definition Speed Dome User Manual
43
Figure 4.4.2 Modify Device Information
Input new IP address, subnet mask, and port number, and click ‘save’ button. If a dialog pops up, showing ‘saved successfully’, that
means you have modified the configuration information; if ‘saving failed’ turns up, click the ‘cancel’ button to quit it.
4.4.3 Resume default password
You can reset the password of the super user as 12345 in case of having forgotten administrator’s password.
Input certain validate code into Resume default password text box, and click OK to finish the administrator’s password initialization.
4.5 Access by WAN
Note: The following settings are for TP-LINK router, which is maybe different from other router’s settings.
Step1: Firstly, select the router’s WAN connection type. As shown in Figure 4.5.1:
To Next Page
Loading...
