HIKVISION DS-2TP03-15VM/W - 3.2 Power On and Off

Handheld Thermography Camera · User Manual
9
Note: When the camera is turned on, the OSD (on-screen display) shows
the battery status. When you see the low battery status, charge the
camera and ensure it’s working properly.
POWER Indicator Status
●
Solid Red
Battery is properly charged.
Flash Red
Error occurred.
●
Solid Green
Battery is fully charged.
●
Off
Battery is not charged.
3.2 Power On and Off
Power On
Remove the lens cover, and hold the button for over three
seconds to turn on the device.
Power Off
When the monocular is turned on, hold the button for three
seconds to power off the device.