5 System Settings
In the system settings interface, you can set the screen brightness, CVBS
output, device initialization parameters, and view the device information.
5.1 Unit Settings
Go to Local Settings ( ) > Device Settings > Unit Settings
For Temperature Unit:
Set the temperature unit as Degree Celsius (°C)/Degree Fahrenheit
(°F)/Degree Kelvin (K).
For Distance Unit:
Set the distance unit as Meter (m)/Inch (“).
5.2 Display Settings
Go to Local Settings ( ) > Device Settings > Display Settings
For Screen Brightness:
Set the screen brightness as Low/Medium/High.
For CVBS Output:
Enable/disable the CVBS output.
Note: Connect the camera to external CVBS display unit before you
enable the CVBS Output function.
5.3 Device Initialization
Go to Local Settings ( ) > Device Settings > Device Initialize to
initialize the device and restore default settings of Measurement
To Next Page
Loading...