4) Press to extend the line, and press to
shorten the line.
5) Press OK button to confirm. The Max.
Temperature, Low Temperature, and Average
Temperature of line (e.g. L1) displays L1 Max: XX
Min: XX Avg: XX. The real-time temperature
trend chart will display.
Note: Only one line supported.
Clear Rules:
Step:
Tap and press OK to clear all temperature rules.
4.2 Network Configuration
The handheld Thermography camera supports both Wi-Fi
connection and WLAN hot spot.
4.2.1 Wi-Fi Settings
Purpose:
Connect the camera to Wi-Fi network, and you can control
the camera via mobile client, etc.
Steps:
1. Select the Local Settings ( ) from the main menu.
2. Go to Local Settings > Device Settings > Wi-Fi
Settings.
3. Tap on Connect Wi-Fi to enable Wi-Fi, and the
searched Wi-Fi will be listed below.
4. Select your Wi-Fi and enter password to show the
keypad interface.
Note: Do NOT tap return or space, or the password
may be incorrect.
5. Tap Close to hide the keypad.
6. Tap OK to confirm.
To Next Page
Loading...