2) Tap on the touch-screen to select a point, or move
the point with the navigation buttons.
3) Press OK button to confirm. The temperature of
custom point (e.g. P1) displays P1 Max: XX.
4) Repeat step 1 to 3 to set other custom points.
Note: At most ten custom points supported.
For Frame Rule:
Steps:
1) Tap on the interface.
2) Tap on the touch-screen to generate a default
frame.
3) Press the △, ▽, ▷, and ◁ button to move the
frame up/down/left/right.
4) Press to enlarge the frame, and press to
contract the frame.
5) Press OK button to confirm. The Max.
Temperature, Low Temperature, and Average
Temperature of frame (e.g. S1) displays S1 Max:
XX Min: XX Avg: XX.
6) Repeat step 1) to 5) to set other frames.
Note: At most ten frames supported.
For Line Rule:
Steps:
1) Tap on the interface.
2) Tap on the touch-screen to generate a default
line.
3) Tap a point as one end of line, and tap another
point as the other end of line.
To Next Page
Loading...