For Point Rule:
You can set Center Point Thermometry, High-Temperature
Point, Low-Temperature Point, and Custom Point
Thermometry.
Center Point Thermometry
System detects the temperature of the center.
Step:
Tap and the temperature (center of view) displays
Cen: XX.
High-Temperature Point
System locates the point of the highest temperature.
Step:
Tap and the temperature (Highest temperature of
view) displays Max: XX.
Low-Temperature Point
System locates the point of the lowest temperature.
Step:
Tap and the temperature (Lowest temperature of
view) displays Min: XX.
Custom Point Thermometry
System detects the temperature of a custom point.
Steps:
1) Tap on the interface.