Digital Video Recorder User Manual
182
Step 2 Click the Add button to enter the Add NetHDD interface, as shown in Figure 13-7.
Figure 13-7 HDD Information Interface
Step 3 Add the allocated NetHDD.
Step 4 Select the type to NAS or IP SAN.
Step 5 Configure the NAS or IP SAN settings.
Add NAS disk:
1) Enter the NetHDD IP address in the text field.
2) Click Search to search the available NAS disks.
3) Select the NAS disk from the list shown below.
Or you can just manually enter the directory in the text field of NetHDD Directory.
4) Click OK to add the configured NAS disk.
Up to 8 NAS disks can be added.
Figure 13-8 Add NAS Disk
To Next Page
Loading...
Need help?
General